3 Main Causes of Kernel Errors

A kernel error is a failure in some code critical to Windows. If you have ever encountered a Blue Screen of Death (BSoD), then you have seen a kernel error. Windows is actually several layers of programs made to work together. You can think of Windows as if it were your body, with many pieces working together to make a whole, and, like your body, some parts of Windows are more important than others.

The kernel is the most important part of Windows. It includes critical programs to handle things like memory management and device drivers for the graphics card. These programs are like a body's heart and brain. If something in the kernel crashes, it will often cause all of Windows to crash.

Software Failures

Because there are a lot of programs in the kernel, there are many opportunities for bugs to appear. Although Microsoft does extensive testing to get rid of bugs, their testing facilities can not run through all the combinations that billions of computers use with Windows when some bugs get through.

However, many of the kernel failures are in device drivers written by companies that make hardware, not by Microsoft. Your graphics card, for example, probably uses a driver created by the video company. These companies often work with Microsoft to test their drivers, but having companies working together adds an additional layer of complexity.

Hardware Failures

A hardware failure can cause a kernel error. If your graphics card fails, it can send bad data to the graphics device driver, which then crashes, creating a kernel error. If your hard disk fails, it can corrupt files used by Windows and cause the programs that use those files to crash.

Registry Failures

Registry failures can cause kernel errors. The registry is a database of information that Windows uses to store information about programs. If the registry gets corrupt, the programs that use it can cause kernel errors.

Registry corruption can come from either software or hardware failures. Software corruption can come from a bug in one of the programs that writes information out to the registry. Or if you turn off your computer without doing a complete shutdown, the registry files may not get completely written to the disk. Hardware corruption can happen when the hard disk fails causing parts of the registry files to be lost. It's a good idea to do some research on kernel errors and other registry issues.

Posted in general | Comments Off on 3 Main Causes of Kernel Errors

Why Computer Hardware Is Important

In this day and age, it is hard to deny the influence of technology in our lives. We live in an era where pretty much is automated and computerized. And amidst all the technological advancement that humankind has achieved, one important device has been created that will only sure to become more relevant to our lives as technology progresses, the computer. No one can deny that computers are now an essential part of our lives, the same way a cell phone and television does. It is safe to say that in this day and age, having no computer would be an inconvenience. Which is why it is important that we know the way our computer works so that we would be aware of the things that we should do in case it stops working. The hardware of the computer is considered to be the most important because without it, it will simply not work.

Simply put if you know how to handle the hardware of a computer and know each of their function for the unit, then you can easily determine what the problem is in case the unit stops functioning. In order to be familiar with basic computer troubleshooting, then you also need to be familiar with computer hardware. A good example of this is the memory of the computer (RAM). All programs and applications that are ran in a computer needs memory. Without RAM it simply will not function. Aside from that, even if you have a RAM but it does have the specifications to keep up with the programs that are being run, then the operation would have slowed down to a crawl. So when it comes to computer hardware, you have to make sure that it is not obsolete, so you need to upgrade depending on what sort of program that you are usually using.

When handling computer hardware, you have to keep in mind some safety measures so you can manipulate the unit safely. Before opening any computer cases, you have to make sure that the unit is unplugged or you might risk electrocution or shocks. While checking your hardware components, always check for damaged parts because that is most likely the one that is causing problems. When inserting components and parts, you have to remember that if it does not fit, then most likely you are inserting it on the wrong slot. If it does not fit, then do not force it or you will risk breaking the component. Before touching any parts inside the unit, make sure that you discharge yourself first by through a grounded metal object or you can use an anti-static wrist strap or mat which is sold in stores for cheap.

By knowing and analyzing every computer hardware part you will know about its importance and if it ever breaks down then you can perform the proper troubleshooting steps. Every hardware component is important for the computer's operation. The performance of your computer largely depends on how good your hardware is, so be sure that they are always in good working condition.

Posted in general | Comments Off on Why Computer Hardware Is Important

The Importance of Educational Software in Educational Institutes

Internet has expanded its dimensions like anything. The incredible expansion of the web world along with its easy and affordability of integrated technology have come together to create a new learning methodology of Educational Software. Nowadays, the task of carrying out educational projects and disseminating education is not at all futuristic or alien. This have not only become an important part of the educational setup but also of the business world. The facility to link with the internet in a reasonably priced and competent manner was the basic reason for this tremendous growth of this. Nowadays, education software available in comprehensive package forms for colleges, schools, Universities and even home use.

With time, educational institutions have become more diverse and therefore they cannot risk being simple temples of education. There are vast varieties of activities in educational institutes like admissions, curriculum management, library management, placements, hostel management, finance management and a number of other requirements. It is in view of these burgeoning requirements of schools and higher educational institutions that Educational Software have become popular nowadays. This software can address all the requirements of an educational institute starting from student curriculum management to school bus tracking system to Biometric Attendance System to Student Information System to Library Automation Systems.

Education Software is nowadays constituents of a school’s identity as they are capable of delivering all the associated tasks. Present day software even provides the facility and access to parents to keep a bird’s view of their kid’s progress in the classroom. The Student Information System enables parents to monitor the curriculum of their children and receive feedbacks from the teachers. Intelligent Library Management System allows easy access to library records.

Another aspect of education software is their Bus Tracking System that ensures the safety of students. It is a path breaking integration into this software. Nowadays, they have become quite affordable integrating advanced GPS applications into the software. They are effective tools for the school management as well as the parents, who want to know whether their students or kids are safe while travelling from school to home and vice versa.

The curriculum management component of this is capable giving an interactive learning experience to students. Nowadays, most of the education software is capable of developing to the next level as and when students grow in their knowledge. Online tests and evaluations have become important tools used by such software in order to test the level of students. It can even take the form of a game in order to stimulate the mind of children giving them real demonstrations of subject matter. Educational Software can now be found for students of all ages and for all subjects.

Posted in general | Comments Off on The Importance of Educational Software in Educational Institutes

What is the Purpose of ERP Software?

Enterprise Resource Planning (ERP) software can be described as a complete business software solution. It is aimed at the integration of all business processes and sub-processes into a single unified system. This system is formulated and implemented in an organization to effectively and efficiently achieve the business goals of the organization.

ERP packages are implemented to manage the existing and prospective business plans and policies in an efficient manner under strict deadlines. It can be referred to as the ultimate business solution package that is predominantly concerned with making sure that the available resources of the organization are utilized in the best possible manner and coordinated with the business objectives of the organization.

It is crucial that modern day business organizations have a single unified system, which aims at harmonizing its business efforts. This can prove to be a crucial determinant in deciding the scope, area and net results of the organization as a whole, rather than running many different systems that don’t work well together. What makes ERP different from any other business solution package is the presence of a single and unified database system.

ERP software is as essential to the needs of a business today as food is for living. Businesses cannot run competitively in the absence of properly drafted and formulated ERP software. The more effective implementation and follow-up, the better are the results. ERP software is needed by all modern-day organizations, irrespective of the size, area of operations and business objectives.

Nowadays there are many ERP packages available in the global market, including SAP, PeopleSoft, Oracle, J D Edwards, and BAAN.

The selection of an ERP software package is dependent on many factors: previous software implementation, nature and size of operations, recommendations of consultants, and management decisions.

Before installing specialized software, a detailed study must be made and reviewed to match the business requirements with the available packages. This must be taken as a serious study as any mistake in selection or its effective implementation can prove disastrous to the organizational objectives and prospects. The ERP software must be installed by an ERP vendor or third-party consulting organization, which are expert service providers when it comes to providing Consulting, customization and support.

Some of the benefits of ERP Software:

* All processes and sub-processes are linked and unified into a single system.

* There are enhancements in the field of productivity, efficiency and achievement of business objectives.

* ERP tends to considerably reduce the response time by effectively transferring crucial information.

* ERP helps in streamlining the numerous functions performed by the organization as a whole.

* It helps the management to make vital decisions with unparalleled accuracy and in-depth study.

Thus, ERP software can effectively change the outlook of any business organization that exists in today’s cutthroat business world. Proper implementation of the ERP software is the key factor, which can benefit the growth prospects of any organization.

Posted in general | Comments Off on What is the Purpose of ERP Software?

How to Change the MPI Node Address For a Siemens S7-300 PLC

I have seven Siemens S7-300 PLCs connected together using the MPI (Multi Point Interface) interface. The Siemens MPI protocol is used by Siemens PLCs to communicate with external devices. I want to rename each of the seven PLCs. Here are the steps to accomplish that task.

First, connect your MPI cable to the first PLC. I will be connecting my laptop to each PLC individually. Power up the PLC and open Simatic Manager. The "New Project" Wizard window will open. Just click Cancel to close the window. Now click the Accessible Nodes icon on the toolbar. A window will open showing the identification of the PLC you are connected to. My window is showing MPI = 2 (directly). Make a note of this address and close the window.

Next we need to download a hardware configuration to the PLC. This is where we will rename the PLC node address. There are probably a couple of different ways to do this – following is how I accomplish this. All seven of my PLCs are the same model; Therefore, I am using the same hardware configuration. For the obvious reasons, I want to give each a different MPI node address. I have a project file that contains all seven of my PLC programs and one hardware configuration file. I open the one hardware configuration file, and then double click Hardware in the right hand window. This will open the HW Configuration window. In this window you should see your PLC with its MPI address given.

Remember when we clicked the Accessible Nodes icon and saw MPI = 2 (directly)? My Hardware Configuration Window is showing a MPI address of 7. Place your mouse cursor on the 7 and double click. Your CPU Properties window will open. It should open to the General tab. Look down and you will see Interface Type MPI with an address of 7. Click Properties and the MPI interface Properties window will open. Using the pull down menu, choose your MPI node address and make sure the MPI (1) 187.5kbps is highlighted and click OK. You are now back on the CPU Properties window where you will see your address has changed. Click OK and you will go back to the Hard Ware window where you can verify your MPI node address has changed.

You will now click the Save and Compile icon and then click the download icon. The Select Target Module window will open. Click OK and the Select Node Address window will open. Here you will see the MPI node address you assigned earlier. You will need to click the View button right below this. You will see the current node address appear, this should be the same as what you saw earlier when you clicked the Accessible Nodes icon. Simply click on this number and you will see it appear in the MPI address slot under the Enter connection to target station. Click OK and the Download to Module window will open. Click OK and the Stop Target Modules window will open. Click OK and the "Do you want to start the module?" Window will open. Click Yes.

Now go back to the SIMATIC Manager window and click the accessible nodes icon. You will see your new MPI node address. You can see this same article with pictures at http://www.morerobototics.com .

Posted in general | Comments Off on How to Change the MPI Node Address For a Siemens S7-300 PLC

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

Build Your Own Tree House – Pros and Cons, Fasteners and Hardware

Tree houses are fun, bonding activities you can do with your friends or family, and can provide a unique and ideal hangout spot surrounded by Mother nature. One of the biggest differences in my opinion, between tree houses and other on-ground add-ons you can build on your property, is the fact that a house up in the trees sways – to varying degrees depending on the height and size of the Tree and branches – and so can add a unique and soothing feel.

There are several prerequisites that must be met before this particular project would be considered feasible for you. The first ones are also the most obvious:

  1. Do you have a suitable tree with your property on which you can construct your tree house? This question may be ambiguous to some, as what kind of tree exactly is considered suitable? Well, this depends largely on the size of the structure in question, as well as the expected load – number of people, furnishings, etc. The larger your tree house is, the larger your tree needs to be.
  2. How are you with heights? Now is not a good time to kid yourself or anyone else if you happen to be abnormally scared of heights! We're all scared of heights to varying degrees, but if you lack the courage or ability to comfortably work at the needed height, this project may not be for you. Granted, it can be built relatively low to the ground as well and still be called a "tree house" – in which case, this may not apply.

Now that we have those out of the way, we can get into the other aspects of building. When compared with a structure on the ground, a tree house may somehow seem like a simpler project due to the fact that some of us have grown up "throwing" little makeshift tree houses up here and there. However, it's important to remember that any halfway decent structure, whether on the ground or up in a tree, requires careful planning and implementation of standard safety code.

Here are some other questions you should ask yourself before concluding the planning stage:

  1. What will I use the tree house for? Depending on your answer, you may want a roof and walls, or you may find it unnecessary. In either case, a rail and / or walls at least a meter high is recommended for safety.
  2. How long do I want it to last? You may think that the answer to this question is obvious, but you should understand that the lifespan of your tree house depends heavily on the materials you use and the quality and number of layers of your protective stain. Tree houses, by virtue of their definition, stand within and under the canopy of the tree in which they are built. Because of this, they are more susceptible to premature rot due to the prolonged shade and humid nature of their environment. The fallen leaves and branches scattered across the deck also serve as decay-accelerators unless they are regularly swept off.

Foundation and Floor-shape

One of the unique beauties of a tree house is the fact that you can simply build around the various branches leaving them exposed within your tree house, enhancing the "natural" atmosphere. As with an on-ground structure, you should start with building your base and floor. You may face complications with the shape of your floor due to the limitations of suitable branches to base off of.

Because of this, there's a possibility you may have to set up for a non-square shape. This may be what you want, or this may be a problem for you. In any case, you should understand that there are some restrictions placed upon you by the particular tree you're working with. All branches used for a foundation should be able to single-handedly carry several hundred pounds, and more if you're expecting higher traffic.

Tree Wood Density and Fastener Quality

Large tree houses that weigh more than the collective weight of their occupants should be carefully designed , as various factors such as the hardness of the tree and fastener quality and design come more into play. Wood will compress where the fasteners connect to the tree to varying degrees based on the hardness of the tree in question, causing a sinking of the tree house.

Professional-grade Tree house Fasteners – Are they Necessary?

There are various tree house fasteners available on the market today specially manufactured for their unique needs. However, the question invariably arises as to how necessary these customized bolts and brackets are in comparison to normal ones found in home centers due to their price. They often cost between one and several hundred dollars each!

The first thing to bear in mind when contemplating the pros and cons of these rather pricey pieces of hardware is that trees are living organizations, and are still growing, moving, and changing shape. Therefore, your tree house and the hardware on which it is mounted must accommodate this movement. Simply bolting the beams into the tree's branches results in a fixed attachment that will force the tree to either pull the screw through the beam or try to grow around the beam.

The first of the two will result in a sudden and dangerous failure , while the second will result in an unhealthy and unnatural growth around the beam, potentially causing disease and decay to set in. Custom bolts and brackets are made with a certain allowance for tree growth, with a section of the bolt that is embedded deep in the tree's heartwood and a large shank that allows axial movement coupled with a female part that is attached to the beam.

So to answer the question of whether these expensive custom parts are necessary, the short answer is yes, and no. Yes, if you lack the know-how to find parts that will accomplish the same purpose as the professional parts do, and no, if you do, and do not require your tree house to last for fifty years. Home centers sell bolts and hardware with large diameters and lengths which can be used, but the entire shank can not be threaded.

The half or so that is embedded into the tree must be threaded, but the reminder that acts as the cushion to compensate for tree-growth must be smooth. You also need a female piece that fits around the smooth shank that has a bracket that can be screwed into your beam. This female bracket then has the freedom to slide along the axis of the smooth bolt shank as the tree grows in girth. All parts should be stainless steel as well – others may corrode to failure.

Obviously, the big tree house building companies would disagree with the above opinion, and the ideal is to buy these parts. I'm just offering an alternative for those who do not have a large budget but still want to construct a safe and environmentally-friendly tree house. There is also a chance you will not be able to find hardware that meets the criteria, leaving you with no other choice.

The professional criterion when it comes to fastening your tree house to your tree seems to be "perch, do not pin". I agree whole-heartedly with this principle and any alternative I save above should not contradict this. But not everyone looking to build a tree house is willing to spend tens of thousands of dollars, so, your budget is a primary factor in determining the quality as well as what kind you would build.

In any case, it should be a safe and fun place to accommodate whatever activities you envision. Taking into consideration the damage inflicted on the tree as well as future complications that may arrise such as those mentioned above when planning, is simply the responsible and consider course of action.

Posted in general | Comments Off on Build Your Own Tree House – Pros and Cons, Fasteners and Hardware

Application Software in Business Activities

Business is any activity undertaken by an individual or a group of person with an intention to make profits. A business engages in various activities like planning of resource, scheduling of activities, coordinating and other managerial activities. All these have to be completed in time in order to generate maximum profit in the production. Prospective entrepreneurs should adhere to these objectives.

Much of business time is put waste when it handles its tasks through the use manual system. This necessitates to the use of the software, an automated means which is efficient-oriented. Examples of the software in business application include the Decision Support System, Transaction Processing system and Management Information System. They can be largely used in resource planning where an enterprise defines way to achievement.

Collaborative resource planning software provides the business people with adequate and reliable information. Marketing information and bureaucracy of the enterprise is unambiguous. Previous methods that contributed to the failures can be fully noted. This enables the enterprise to opt to use other successful means in use elsewhere. An efficient resource planning software helps you to generate and retrieve information about resource allocation in form of detailed niche reports. As a result, time as a resource is much conserved and can be used in other productive areas.

Boundaries are clearing defined by the software. The business is expected to work towards the laid limits by the legal authority, operational, technical, economic and social feasibility. Beyond the predetermined extents, no productive operation can be encountered.

Scheduling of activities is best in practice via use of the software. The order and the way in which operation is accurately developed by use of the program, this results into application of qualitative business techniques, where there is matching of skills and jobs to done. The enterprise standards of performance are maintained. Cases of underemployment or over employment are eradicated. In turn, employees’ are encouraged to exercise creativity and innovation in right of their propelling positions, and hence works towards achievement of objectives of the business.

Planning software makes efficient forecasting of resources. Unknown future is determined prior. Situations like inflation, competition increases government provision of subsidies and technological changes can be adequately known. The fallout is to relay strategies to deal with upcoming challenging matters.

Top echelons (management) benefits significantly in software application. Executives’ unstructured decisions are accurately established. They rapidly derive information from the software. For example, decisions on where to establish a new firm or a branch, whether there is funds to finance multiple projects.

Management need to store information in reliable source (in software). This is used for swift evaluation of business performance. They can decide to reward the best performing employees based on the results retrieved from the software. This motivates employees to work zeal and confidence. Their individuals objectives are harmonized to entire business objectives.

Managers use software to control the progress of activities. Those deviating from the predetermined plans can be precisely noted. Management can also rely on software for marketing of its products. Research on business competition like advertisement and efficient market penetration means is done in detail.

In conclusion, software suitable for effective planning of the business operations, scheduling of activities and other managerial activities. Without use of software, a business is considered to be running behind technology and operating at obsolete level.

Posted in general | Comments Off on Application Software in Business Activities

Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services